Around 58 percent of jobs were in medical equipment and supplies manufacturing, usually in small, privately owned businesses.
Most technicians learn their craft on the job, but many employers prefer to hire those with formal training.
Faster than average employment growth is expected for dental and ophthalmic laboratory technicians, while average employment growth is expected for medical appliance technicians.
Job opportunities should be favorable because few people seek these positions.
When patients require a medical device to help them see clearly, chew and speak well, or walk, their healthcare providers send requests to medical, dental, and ophthalmic laboratory technicians. These technicians produce a variety of implements to help patients.
Medical appliance technicians construct, fit, maintain, and repair braces, artificial limbs, joints, arch supports, and other surgical and medical appliances. They follow prescriptions or detailed instructions from podiatrists, orthotists, prosthetists or other healthcare professionals for patients who need them because of a birth defect, disease, accident, or amputation. Podiatrists or orthotists request orthoses—braces, supports, corrective shoes, or other devices; while prosthetists order prostheses—replacement limbs, such as an arm, leg, hand, or foot. Medical appliance technicians who work with these types of devices are called orthotic and prosthetic (O&P) technicians. Other medical appliance technicians work with appliances, such as hearing aids, that help correct other medical problems.
For O&P technicians, creating orthoses and prostheses takes several steps. First, technicians construct or receive a plaster cast of the patient's limb or foot to use as a pattern. Increasingly, technicians are using digital files sent by the prescribing practitioner who uses a scanner and uploads the images using computer software. When fabricating artificial limbs or braces, O&P technicians utilize many different materials including plaster, thermoplastics, carbon fiber, acrylic and epoxy resins. More advanced prosthetic devices are electronic, using information technology. Next, O&P technicians carve, cut, or grind the material using hand or power tools. Then they weld the parts together and use grinding and buffing wheels to smooth and polish the devices. Next, they may cover or pad the devices with leather, felt, plastic, or another material. Finally, technicians may mix pigments according to formulas to match the patient's skin color and apply the mixture to create a cosmetic cover for the artificial limb.
After fabrication, medical appliance technicians test devices for proper alignment, movement, and biomechanical stability using meters and alignment fixtures. Over time the appliance will wear down, so technicians must repair and maintain the device. They also may service and repair the machinery used for the fabrication of orthotic and prosthetic devices.
Dental laboratory technicians fill prescriptions from dentists for crowns, bridges, dentures, and other dental prosthetics. First, dentists send a prescription or work authorization for each item to be manufactured, along with an impression or mold of the patient's mouth or teeth. With new technology, a technician may receive a digital impression rather than a physical mold. Then dental laboratory technicians, also called dental technicians, create a model of the patient's mouth by pouring plaster into the impression and allowing it to set. They place the model on an apparatus that mimics the bite and movement of the patient's jaw. The model serves as the basis of the prosthetic device. Technicians examine the model, noting the size and shape of the adjacent teeth, as well as gaps within the gumline. Based upon these observations and the dentist's specifications, technicians build and shape a wax tooth or teeth model, using small hand instruments called wax spatulas and wax carvers. The wax model is used to cast the metal framework for the prosthetic device.
After the wax tooth has been formed, dental technicians pour the cast and form the metal and, using small hand-held tools, prepare the surface to allow the metal and porcelain to bond. They then apply porcelain in layers to mimic the precise shape and color of a tooth. Technicians place the tooth in a porcelain furnace to bake the porcelain onto the metal framework, and then they adjust the shape and color with subsequent grinding and addition of porcelain to achieve a sealed finish. The final product is a nearly exact replica of the lost tooth or teeth.
In some laboratories, technicians perform all stages of the work, whereas in other labs, each technician does only a few. Dental laboratory technicians can specialize in one of five areas—orthodontic appliances, crowns and bridges, complete dentures, partial dentures, or ceramics. Job titles can reflect specialization in these areas. For example, technicians who make porcelain and acrylic restorations are called dental ceramists.
Ophthalmic laboratory technicians—also known as manufacturing opticians, optical mechanics, or optical goods workers—make prescription eyeglass or contact lenses. Ophthalmic laboratory technicians cut, grind, edge, polish, and finish lenses according to specifications provided by dispensing opticians, optometrists, or ophthalmologists. Although some lenses still are produced by hand, technicians are increasingly using automated equipment to make lenses. To make a pair of glasses, typically the technician cuts the prescription lenses, bevels the edges to fit the frame, dips each lens into dye if the prescription calls for tinted or coated lenses, polishes the edges, and combines the lenses and frame parts. Some ophthalmic laboratory technicians manufacture lenses for other optical instruments, such as telescopes and binoculars.
In small laboratories, technicians usually handle every phase of the operation. In large ones, in which virtually every phase of the operation is automated, technicians may be responsible for operating computerized equipment. Technicians also inspect the final product for quality and accuracy.
Ophthalmic laboratory technicians should not be confused with workers in other vision care occupations, such as ophthalmologists, optometrists, and dispensing opticians. (See the statement on physicians and surgeons, which includes ophthalmologists, as well as the statements on optometrists and opticians, dispensing, elsewhere in the Handbook.)
Work environment. Medical, dental, and ophthalmic laboratory technicians generally work in clean, well-lighted, and well-ventilated laboratories. They have limited contact with the public. Most salaried laboratory technicians work 40 hours a week, but a few work part time. At times, technicians wear goggles to protect their eyes, gloves to handle hot objects, or masks to avoid inhaling dust. They may spend a great deal of time standing. Medical appliance technicians should be particularly careful when working with tools because there is a risk of injury.
Dental technicians usually have their own workbenches, which can be equipped with Bunsen burners, grinding and polishing equipment, and hand instruments, such as wax spatulas and wax carvers. Some dental technicians have computer-aided milling equipment to assist them with creating artificial teeth.
Dental laboratory technicians create crowns, bridges, dentures, and other dental prosthetics.
Most medical, dental, and ophthalmic laboratory technicians learn their craft on the job. Many employers prefer to hire those with formal training or at least a high school diploma.
Education and training. Although there are no formal education or training requirements to become a medical, dental, or ophthalmic laboratory technician, having a high school diploma is typically the standard requirement for obtaining a job. High school students interested in becoming medical, dental, or ophthalmic laboratory technicians should take courses in mathematics and science. Courses in metal and wood shop, art, drafting, and computers are recommended. Courses in management and business may help those wishing to operate their own laboratories.
Most medical, dental, and ophthalmic laboratory technicians are hired with a high school diploma and learn their tasks through on-the-job training. They usually begin as helpers and gradually learn new skills as they gain experience. For example, dental laboratory technicians begin by pouring plaster into an impression, and progress to more complex procedures, such as making porcelain crowns and bridges. Ophthalmic laboratory technicians may start by marking or blocking lenses for grinding and move onto grinding, cutting, edging, and beveling lenses as they progress.
The length of time spent in on-the-job training varies for each of these occupations. For example, medical appliance technicians usually receive long-term training, while ophthalmic laboratory technicians usually spend less time in training. The length of the training period also varies by the laboratory where the technician is employed, since each laboratory operates differently.
Formal training also is available. In 2008, there were 5 orthotic- and prosthetic-technician programs accredited by the National Commission on Orthotic and Prosthetic Education (NCOPE). These programs offer either an associate degree or a 1-year certificate for orthotic or prosthetic technicians.
Training in dental laboratory technology is available through universities, community and junior colleges, vocational-technical institutes, and the Armed Forces. In 2008, 20 programs in dental laboratory technology were accredited by the Commission on Dental Accreditation in conjunction with the American Dental Association. Accredited programs normally take 2 years to complete, although a few programs can take up to 4 years to complete.
A few ophthalmic laboratory technicians learn their trade in the Armed Forces or in the few programs in optical technology offered by vocational-technical institutes or trade schools. In 2008, there were two programs in ophthalmic technology accredited by the Commission on Opticianry Accreditation (COA).
Licensure and certification. Three States–Kentucky, South Carolina, and Texas–require a dental laboratory to employ at least one Certified Dental Technician in order to operate. This certification is administered by the National Board for Certification in Dental Laboratory Technology (NBC) and the requirements are discussed under Certification and Advancement. In Florida, laboratories must register with the State and at least one dental technician in each dental laboratory must complete 18 hours of continuing education every two years.
Other qualifications. A high degree of manual dexterity, good vision, and the ability to recognize very fine color shadings and variations in shape are necessary for medical, dental, and ophthalmic laboratory technicians. An artistic aptitude for detailed work also is important. Computer skills are valuable for technicians using automated systems.
Certification and advancement. Certification may increase chances of advancement. Voluntary certification for orthotic and prosthetic technicians is available through the American Board for Certification in Orthotics and Prosthetics (ABC). Applicants are eligible for an exam after completing a program accredited by NCOPE or obtaining 2 years of experience as a technician under the direct supervision of an ABC-certified practitioner. After successfully passing the appropriate exam, technicians receive the Registered Orthotic Technician, Registered Prosthetic Technician, or Registered Prosthetic-Orthotic Technician credential.
With additional formal education, medical appliance technicians who make orthotics and prostheses can advance to become orthotists or prosthetists—practitioners who work with patients who need braces, prostheses, or related devices and help to determine the specifications for those devices.
Dental laboratory technicians may obtain the Certified Dental Technician designation from the National Board for Certification in Dental Laboratory Technology (NBC), an independent board established by the National Association of Dental Laboratories. Certification, which is voluntary except in three States, can be obtained in five specialty areas: crowns and bridges, ceramics, partial dentures, complete dentures, and orthodontic appliances. To qualify for the CDT credential, technicians must meet educational requirements and pass two written exams and one practical exam. The educational requirement may be obtained through graduation from a dental technology program or at least 5 years of experience as a dental laboratory technician. CDT’s must complete twelve hours of continuing education each year to maintain their certification. Dental technicians who only perform certain tasks in a laboratory can take a written and practical exam in modules of dental technology. These result in a Certificate of Competency in a specific skill area and do not require continuing education.
In large dental laboratories, dental technicians may become supervisors or managers. Experienced technicians may teach or take jobs with dental suppliers in such areas as product development, marketing, and sales. Opening one's own laboratory is another, and more common, way to advance and earn more.
Ophthalmic laboratory technicians also can become supervisors and managers. Some become dispensing opticians, although further education or training is generally required to advance.
Medical, dental, and ophthalmic laboratory technicians held about 95,200 jobs in 2008. About 58 percent of jobs were in medical equipment and supplies manufacturing, which usually are small, privately owned businesses with fewer than five employees. However, some laboratories are large; a few employ more than 1,000 workers. The following tabulation shows employment by occupation:
Dental laboratory technicians
46,000
Opthalmic laboratory technicians
35,200
Medical appliance technicians
13,900
In addition to manufacturing laboratories, many medical appliance technicians worked in health and personal care stores, while others worked in public and private hospitals, professional and commercial equipment and supplies merchant wholesalers, or consumer goods rental centers. Some were self-employed. In addition to manufacturing laboratories, many dental laboratory technicians worked in offices of dentists. Some dental laboratory technicians open their own offices.
Most ophthalmic laboratory technician jobs were in medical equipment and supplies manufacturing laboratories. Others worked in health and personal care stores, offices of optometrists, and professional and commercial equipment and supplies merchant wholesalers.
Overall employment of medical, dental, and ophthalmic laboratory technicians is expected to grow faster than the average, but varies by detailed occupation. Job opportunities should be favorable because few people seek these positions.
Employment change. Overall employment for these occupations is expected to grow 14 percent from 2008 to 2018, which is faster than the average for all occupations. Medical appliance technicians will grow at 11 percent, about as fast as the average for all occupations, because of the increasing prevalence of the two leading causes of limb loss—diabetes and cardiovascular disease—and because of the increasing rate of obesity. The demand for orthotic devices, such as braces and orthopedic footwear, will increase as more people will need these support devices. In addition, advances in technology may spur demand for prostheses that allow for greater movement.
Employment of dental laboratory technicians is expected to grow 14 percent, which is faster than the average for all occupations. During the last few years, increased demand has arisen from an aging public that is growing increasingly interested in cosmetic prostheses. For example, many dental laboratories are filling orders for composite fillings that are the same shade of white as natural teeth to replace older, less attractive fillings. Additionally, the growing and aging population will require more dental products fabricated by dental technicians, such as bridges and crowns, since more people are retaining their original teeth. This job growth will be limited, however, by productivity gains stemming from continual technological advancements in laboratories.
Ophthalmic laboratory technicians are expected to experience employment growth of 15 percent, faster than the average for all occupations. Demographic trends make it likely that many more Americans will need vision care in the years ahead. Not only will the population grow, but also the proportion of middle-aged and older adults is projected to increase rapidly. Middle age is a time when many people use corrective lenses for the first time, and the need for vision care continues to increase with age. However, the increasing use of automated machinery will temper job growth for ophthalmic laboratory technicians.
Job prospects. Job opportunities for medical, dental, and ophthalmic laboratory technicians should be favorable, due to expected faster than average growth. Few people seek these jobs, reflecting the relatively limited public awareness and low starting wages. Those with formal training in a medical, dental, or ophthalmic laboratory technology program will have the best job prospects. In addition to openings from job growth, many job openings also will arise from the need to replace technicians who transfer to other occupations or who leave the labor force.
Median annual wages of wage and salary medical appliance technicians were $34,460 in May 2008. The middle 50 percent earned between $26,600 and $47,210. The lowest 10 percent earned less than $21,720, and the highest 10 percent earned more than $63,750.
Median annual wages of wage and salary dental laboratory technicians were $34,170 in May 2008. The middle 50 percent earned between $26,260 and $44,790. The lowest 10 percent earned less than $20,740, and the highest 10 percent earned more than $58,140. In the two industries that employed the most dental laboratory technicians—medical equipment and supplies manufacturing and offices of dentists—median annual wages were $33,700 and $35,000, respectively.
Median annual wages of wage and salary ophthalmic laboratory technicians were $27,210 in May 2008. The middle 50 percent earned between $21,580 and $34,810. The lowest 10 percent earned less than $18,080, and the highest 10 percent earned more than $42,890. Median annual wages were $25,250 in medical equipment and supplies manufacturing and $25,580 in health and personal care stores, the two industries that employ the most ophthalmic laboratory technicians.
For information on careers in orthotics and prosthetics, contact:
American Academy of Orthotists and Prosthetists, 1331 H St. NW., Suite 501, Washington, DC 20005. Internet: http://www.opcareers.org
For a list of accredited programs for orthotic and prosthetic technicians, contact:
National Commission on Orthotic and Prosthetic Education, 330 John Carlyle St., Suite 200, Alexandria, VA 22314. Internet: http://www.ncope.org
For information on requirements for certification of orthotic and prosthetic technicians, contact:
American Board for Certification in Orthotics, Prosthetics, and Pedorthics, 330 John Carlyle St., Suite 210, Alexandria, VA 22314. Internet: http://www.abcop.org
For a list of accredited programs in dental laboratory technology, contact:
General information on grants and scholarships is available from individual schools. State employment service offices can provide information about job openings for medical, dental, and ophthalmic laboratory technicians.
Suggested citation:
Bureau of Labor Statistics, U.S. Department of Labor, Occupational Outlook Handbook, 2010-11 Edition,
Medical, Dental, and Ophthalmic Laboratory Technicians, on the Internet at http://www.bls.gov/oco/ocos238.htm
(visited February 10, 2010).
