What Water Transportation Occupations Do
Captains and mates supervise other workers.
Workers in water transportation occupations operate and maintain vessels that take cargo and people over water. These vessels travel to and from foreign ports across the ocean, to domestic ports along the coasts, across the Great Lakes, and along the country’s many inland waterways.
Water transportation workers typically do the following:
- Operate and maintain non-military vessels
- Follow their vessel’s strict chain of command
- Ensure the safety of all people and cargo on board
These workers, sometimes called merchant mariners, work on a variety of ships.
Some operate large deep-sea container ships to transport manufactured goods around the world.
Others work on bulk carriers that move heavy commodities, such as coal or iron ore, across the oceans and over the Great Lakes.
Still others work on both large and small tankers that carry oil and other liquid products around the country and the world. Others work on supply ships that transport equipment and supplies to offshore oil and gas platforms.
Workers on tugboats help barges and other boats maneuver in small harbors and at sea.
Salvage vessels that offer emergency services also employ merchant mariners.
Cruise ships employ a large number of water transportation workers, and some merchant mariners work on ferries to transport passengers along shorter distances.
A typical deep sea merchant ship, large coastal ship, or Great Lakes merchant ship employs a captain and chief engineer, along with three mates, three assistant engineers, and a number of sailors and marine oilers. Smaller vessels that operate in harbors or rivers may have a smaller. The specific compliment of mariners is dependent on US Coast Guard regulations.
Also, there are other workers on ships, such as cooks, electricians, and mechanics. For more information, see the profiles on cooks, electricians, and general maintenance and repair workers.
Captains, sometimes called masters, have overall command of a vessel. They have the final responsibility for the safety of the crew, cargo, and passengers. Captains typically do the following:
- Supervise the work of other officers and the crew
- Ensure that proper safety procedures are followed
- Prepare a maintenance and repair budget
- Oversee the loading and unloading of cargo or passengers
- Keep logs and other records that track the ship's movements and activities
- Interact with passengers on cruise ships
Mates, or deck officers, direct the operation of a vessel while the captain is off duty. Large ships have three officers, called first, second, and third mates. The first mate has the highest authority and takes command of the ship if the captain is incapacitated. Usually, the first mate is in charge of the cargo and/or passengers, the second mate is in charge of navigation, and the third mate is in charge of safety. On smaller vessels, there may be only one mate who handles all of the responsibilities. Deck officers typically do the following:
- Alternate watches with the captain and other officers
- Supervise and coordinate the activities of the deck crew
- Assist with docking the ship
- Monitor the ship’s position, using charts and other navigational aides
- Determine the speed and direction of the vessel
- Inspect the cargo hold during loading, to ensure that the cargo is stowed according to specifications
- Make announcements to passengers, when needed
Pilots guide ships in harbors, on rivers, and on other confined waterways. They are not part of a ship’s crew but go aboard a ship to guide it through a particular waterway that they are familiar with. They work in places where a high degree of familiarity with local tides, currents, and hazards is needed. Some, called harbor pilots, work for ports and help many ships coming into the harbor during the day. When coming into a commercial port, a captain will often have to turn control of the vessel over to a pilot, who can safely guide it into the harbor. Pilots typically do the following:
- Board an unfamiliar ship from a small boat in the open water, often using a ladder
- Confer with a ship’s captain about the vessel’s destination and any special requirements it has
- Establish a positive working relationship with a vessel’s captain and deck officers
- Receive mooring instructions from shore dispatchers
Sailors, or deckhands, operate and maintain the vessel and deck equipment. They make up the deck crew and keep all parts of a ship, other than areas related to the engine and motor, in good working order. New deckhands are called ordinary seamen and do the least-complicated tasks. Experienced deckhands are called able seamen and usually make up most of a crew. Some large ships have a boatswain, who is the chief of the deck crew. Sailors typically do the following:
- Stand watch, looking for other vessels or obstructions in their ship’s path, and for navigational aids, such as buoys and lighthouses
- Steer the ship and measure water depth in shallow water
- Do routine maintenance, such as painting the deck and chipping away rust
- Keep the inside of the ship clean
- Handle lines when docking or departing
- Tie barges together when they are being towed
- Load and unload cargo
- Help passengers, when needed
Ship engineers operate and maintain a vessel’s propulsion system. This includes the engine, boilers, generators, pumps, and other machinery. Large vessels usually carry a chief engineer, who has command of the engine room and its crew, and a first, second, and third assistant engineer. The assistant engineer oversees the engine and related machinery when the chief engineer is off duty. Small ships may only have one engineer. Engineers typically do the following:
- Maintain the electrical, refrigeration, and ventilation systems of a ship
- Start the engine and regulate the vessel’s speed, based on the captain’s orders
- Record information in an engineering log
- Keep an inventory of mechanical parts and supplies
- Do routine maintenance checks throughout the day
- Calculate refueling requirements
Marine oilers work in the engine room, helping the engineers keep the propulsion system in working order. They are the engine room equivalent of sailors. New oilers are usually called wipers, or pumpmen, on vessels handling liquid cargo. With experience, a wiper can become a Qualified Member of the Engine Department (QMED). Marine oilers typically do the following:
- Lubricate gears, shafts, bearings, and other parts of the engine or motor
- Read pressure and temperature gauges and record data
- Help engineers with repairs to machinery
- Connect hoses, operate pumps, and clean tanks
- May assist the deck crew with loading or unloading of cargo
Motorboat operators run small, motor-driven boats that only carry a few passengers. They work for a variety of services, such as fishing charters, tours, and harbor patrols. Motorboat operators typically do the following:
- Check and change the oil and other fluids on their boat
- Pick up passengers and help them board the boat
- May act as a tour guide