News Release Information

13-938-CHI

Friday, May 17, 2013

Contacts

Technical information:
Media contact:
  • (312) 353-1138

Occupational Employment and Wages in Rockford, Ill. MSA – May 2012


Workers in the Rockford Metropolitan Statistical Area had an average (mean) hourly wage of $19.81 in May 2012, about 10 percent below the nationwide average of $22.01, to the U.S. Bureau of Labor Statistics reported today. Regional Commissioner Charlene Peiffer noted that, after testing for statistical significance, wages in the local area were significantly higher than their respective national averages in 1 of the 22 major occupational groups: construction and extraction. Eleven groups had significantly lower wages than their respective national averages, including computer and mathematical; management; and arts, design, entertainment, sports, and media.

When compared to the nationwide distribution, local employment was more highly concentrated in 2 of the 22 occupational groups: production, and transportation and material moving. Conversely, 13 groups had employment shares significantly below their national representation, including office and administrative support; business and financial operations; and computer and mathematical.

 

 

Table A. Occupational employment and wages by major occupational group, United States and the Rockford Metropolitan Statistical Area, and measures of statistical significance, May 2012
Major occupational group Percent of total employment Mean hourly wage
United States Rockford United States Rockford Percent difference (1)

Total, all occupations

100.0% 100.0% $22.01 $19.81* -10

Management

4.9 4.5* 52.20 43.68* -16

Business and financial operations

4.9 3.0* 33.44 27.27* -18

Computer and mathematical

2.7 0.8* 38.55 29.66* -23

Architecture and engineering

1.8 1.6 37.98 32.03* -16

Life, physical, and social science

0.8 0.3* 32.87 30.73* -7

Community and social services

1.4 1.4 21.27 20.40 -4

Legal

0.8 0.4* 47.39 50.25 6

Education, training, and library

6.4 6.5 24.62 24.37 -1

Arts, design, entertainment, sports, and media

1.3 0.9* 26.20 18.08* -31

Healthcare practitioner and technical

5.9 7.1 35.35 34.41 -3

Healthcare support

3.0 3.1 13.36 13.60 2

Protective service

2.5 2.0 20.70 16.96* -18

Food preparation and serving related

8.9 8.0* 10.28 9.80* -5

Building and grounds cleaning and maintenance

3.3 2.5* 12.34 12.65 3

Personal care and service

2.9 2.4* 11.80 10.62* -10

Sales and related

10.6 9.7* 18.26 16.33* -11

Office and administrative support

16.4 14.2* 16.54 15.12* -9

Farming, fishing, and forestry

0.3 (2)* 11.65 11.20 -4

Construction and extraction

3.8 2.5* 21.61 26.60* 23

Installation, maintenance, and repair

3.9 3.8 21.09 21.93 4

Production

6.6 15.4* 16.59 17.25 4

Transportation and material moving

6.7 10.0* 16.15 15.25 -6

Footnotes:
(1) A positive percent difference measures how much the mean wage in Rockford is above the national mean wage, while a negative difference reflects a lower wage.
(2) Indicates a value of less than 0.05 percent
* The percent share of employment or mean hourly wage for this area is significantly different from the national average of all areas at the 90-percent confidence level.

One occupational group—production—was chosen to illustrate the diversity of data available for any of the 22 major occupational categories. Rockford had 21,550 jobs in production, accounting for 15.4 percent of local area employment, significantly higher than the 6.6-percent share nationally. The average hourly wage for this occupational group locally was $17.25, compared to the national wage of $16.59.

With employment of 5,760, team assemblers was the largest occupation within the production group, followed by machinists (2,940) and helpers--production workers (1,180). Among the higher paying jobs were stationary engineers and boiler operators and water and wastewater treatment plant and system operators, with mean hourly wages of $30.33 and $28.25, respectively. At the lower end of the wage scale were laundry and dry-cleaning workers ($9.47) and bakers ($10.74). (Detailed occupational data for production are presented in table 1; for a complete listing of detailed occupations available go to table 1; for a complete listing of detailed occupations available go to www.bls.gov/oes/current/oes_40420.htm)

Location quotients allow for the exploration of an area’s occupational make-up by comparing the composition of jobs in an area relative to the national average.(See table 1.) For example, a location quotient of 2.0 indicates that an occupation accounts for twice the share of employment in the area than it does nationally. In the Rockford Metropolitan Statistical Area, above average concentrations of employment were found in many of the occupations within the production group. For instance, milling and planing machine setters, operators, and tenders, metal and plastic were employed at 8.5 times the national rate in Rockford, and engine and other machine assemblers, at 8.1 times the U.S. average. On the other hand, butchers and meat cutters had a location quotient of 1.0 in Rockford, indicating that this particular occupation’s local and national employment shares were similar.

These statistics are from the Occupational Employment Statistics (OES) survey, a federal-state cooperative program between BLS and State Workforce Agencies, in this case, the Illinois Department of Employment Security.

With the release of the May 2012 estimates, OES data are based on the 2010 Standard Occupational Classification (SOC) system for the first time. The OES survey provides estimates of employment and hourly and annual wages for wage and salary workers in 22 major occupational groups and more than 800 detailed occupations for the nation, states, metropolitan statistical areas, metropolitan divisions, and nonmetropolitan areas. In addition, employment and wage estimates for 94 minor groups and 458 broad occupations are available in the national data for the first time. Information about the 2010 SOC is available on the BLS website at www.bls.gov/soc.

The May 2012 OES estimates are the first to be produced using the 2012 North American Industry Classification System (NAICS). Information about the 2012 NAICS is available on the BLS website at www.bls.gov/bls/naics.htm .

OES wage and employment data for the 22 major occupational groups in the Rockford Metropolitan Statistical Area were compared to their respective national averages based on statistical significance testing. Only those occupations with wages or employment shares above or below the national wage or share after testing for significance at the 90-percent confidence level meet the criteria.

NOTE: A value that is statistically different from another does not necessarily mean that the difference has economic or practical significance. Statistical significance is concerned with the ability to make confident statements about a universe based on a sample. It is entirely possible that a large difference between two values is not significantly different statistically, while a small difference is, since both the size and heterogeneity of the sample affect the relative error of the data being tested.


Technical Note

The Occupational Employment Statistics (OES) survey is a semiannual mail survey measuring occupational employment and wage rates for wage and salary workers in nonfarm establishments in the United States. Guam, Puerto Rico, and the Virgin Islands are also surveyed, but their data are not included in the national estimates. OES estimates are constructed from a sample of about 1.2 million establishments. Forms are mailed to approximately 200,000 sampled establishments in May and November each year for a 3-year period. May 2012 estimates are based on responses from six semiannual panels collected in May 2012, November 2011, May 2011, November 2010, May 2010, and November 2009. The overall national response rate for the six panels is 76.6 percent based on establishments and 72.9 percent based on employment. The sample in the Rockford Metropolitan Statistical Area included 1,716 establishments with a response rate of 79 percent. For more information about OES concepts and methodology, go to www.bls.gov/news.release/ocwage.tn.htm.

Area definitions

The substate area data published in this release reflect the standards and definitions established by the U.S. Office of Management and Budget.

The Rockford, Ill. Metropolitan Statistical Area  includes Boone and Winnebago Counties.

Additional information

OES data are available on our regional web page at www.bls.gov/ro5/home.htm. Answers to frequently asked questions about the OES data are available at www.bls.gov/oes/oes_ques.htm. Detailed technical information about the OES survey is available in our Survey Methods and Reliability Statement on the BLS website at www.bls.gov/oes/2012/may/methods_statement.pdf. Information in this release will be made available to sensory impaired individuals upon request – Voice phone: 202-691-5200; Federal Relay Service: 1-800-877-8339.

OOH Earnings Table Extraction Wizard - output frame
Table 1. Employment and wage data from the Occupational Employment Statistics survey, by occupation, Rockford Metropolitan Statistical Area, May 2012
Occupation (1) Employment Mean wages
Level (2) Location quotient (3) Hourly Annual(4)

Production Occupations

21,5502.3$17.25$35,880

First-Line Supervisors of Production and Operating Workers

1,1601.927.5557,310

Electrical and Electronic Equipment Assemblers

1100.515.8032,870

Electromechanical Equipment Assemblers

(5)(5)21.5244,750

Engine and Other Machine Assemblers

3608.119.2340,000

Structural Metal Fabricators and Fitters

300.419.2340,000

Team Assemblers

5,7605.318.7639,030

Assemblers and Fabricators, All Other

3401.212.6426,290

Bakers

1000.610.7422,340

Butchers and Meat Cutters

1501.014.0829,290

Food Batchmakers

4003.714.3729,880

Computer-Controlled Machine Tool Operators, Metal and Plastic

4403.018.6838,860

Computer Numerically Controlled Machine Tool Programmers, Metal and Plastic

1003.920.7843,220

Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic

1501.815.6632,570

Forging Machine Setters, Operators, and Tenders, Metal and Plastic

1506.120.4442,520

Rolling Machine Setters, Operators, and Tenders, Metal and Plastic

1002.516.8935,130

Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic

4402.313.1127,260

Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic

803.716.3233,940

Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic

4305.815.5132,250

Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic

3308.017.0535,460

Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic

2108.517.2435,850

Machinists

2,9407.016.7934,920

Molding, Coremaking, and Casting Machine Setters, Operators, and Tenders, Metal and Plastic

(5)(5)11.7624,460

Multiple Machine Tool Setters, Operators, and Tenders, Metal and Plastic

3003.315.7332,720

Tool and Die Makers

3804.620.7243,110

Welders, Cutters, Solderers, and Brazers

3501.018.2337,920

Welding, Soldering, and Brazing Machine Setters, Operators, and Tenders

901.715.8933,050

Heat Treating Equipment Setters, Operators, and Tenders, Metal and Plastic

1205.218.1437,720

Plating and Coating Machine Setters, Operators, and Tenders, Metal and Plastic

1102.916.6134,550

Tool Grinders, Filers, and Sharpeners

504.116.6934,720

Metal Workers and Plastic Workers, All Other

502.4(5)(5)

Prepress Technicians and Workers

701.516.9135,170

Printing Press Operators

1100.615.5632,360

Print Binding and Finishing Workers

701.313.4628,000

Laundry and Dry-Cleaning Workers

3401.69.4719,710

Pressers, Textile, Garment, and Related Materials

701.212.0224,990

Sewing Machine Operators

(5)(5)11.8524,650

Cabinetmakers and Bench Carpenters

400.415.9133,090

Stationary Engineers and Boiler Operators

(5)(5)30.3363,090

Water and Wastewater Treatment Plant and System Operators

(5)(5)28.2558,750

Grinding and Polishing Workers, Hand

1103.317.5836,570

Mixing and Blending Machine Setters, Operators, and Tenders

300.315.7932,840

Cutting and Slicing Machine Setters, Operators, and Tenders

701.114.1029,330

Extruding, Forming, Pressing, and Compacting Machine Setters, Operators, and Tenders

(5)(5)15.1331,470

Inspectors, Testers, Sorters, Samplers, and Weighers

1,0902.218.1837,810

Dental Laboratory Technicians

501.322.4346,640

Packaging and Filling Machine Operators and Tenders

3600.915.7132,670

Coating, Painting, and Spraying Machine Setters, Operators, and Tenders

4305.014.6230,410

Painters, Transportation Equipment

400.719.4640,490

Photographic Process Workers and Processing Machine Operators

400.911.2923,480

Paper Goods Machine Setters, Operators, and Tenders

400.418.0937,620

Helpers--Production Workers

1,1802.611.0723,020

Production Workers, All Other

7103.012.7326,480

Footnotes:
(1) For a complete listing of all detailed occupations in Rockford, IL, see www.bls.gov/oes/current/oes_40420.htm.
(2) Estimates for detailed occupations do not sum to the totals because the totals include occupations not shown separately. Estimates do not include self-employed workers.
(3) The location quotient is the ratio of the area concentration of occupational employment to the national average concentration. A location quotient greater than one indicates the occupation has a higher share of employment than average, and a location quotient less than one indicates the occupation is less prevalent in the area than average.
(4) Annual wages have been calculated by multiplying the hourly mean wage by a ‘year-round, full-time’ hours figure of 2,080 hours; for those occupations where there is not an hourly mean wage published, the annual wage has been directly calculated from the reported survey data.
(5) Estimate not released.

 

Last Modified Date: May 17, 2013