Drywall Installers, Ceiling Tile Installers, and Tapers

Summary

What Drywall Installers, Ceiling Tile Installers, and Tapers Do About this section

Drywall installers, ceiling tile installers, and tapers work with many different types of tools.

Drywall installers and ceiling tile installers hang wallboard and install ceiling tile inside buildings. Tapers prepare the wallboard for painting, using tape and other materials. Many workers both install and tape wallboard.

Duties

Drywall installers, ceiling tile installers, and tapers typically do the following:

• Measure, mark, and cut drywall panels according to design plans  
• Fasten panels and tiles to support structures
• Patch, trim, and smooth rough spots and edges
• Apply tape and sealing compound to cover joints between wallboards
• Add coats of sealing compound to create an even surface
• Sand all joints and holes for a smooth, seamless finish

Drywall and ceiling tile installers place panels over the walls and ceilings of interior rooms in buildings. The panels cover insulation, electrical wires, and pipes; dampen sound; and provide fire resistance. Tapers prepare the drywall for finishing.

Workers may use mechanical lifts or stand on stilts, ladders, or scaffolds to hang and prepare ceilings. After hanging wallboards, workers use trowels to spread coats of sealing compound over cracks, indentations, and other imperfections. Some workers use a mechanical applicator, a tool that spreads sealing compound on the wall joint while dispensing and setting tape at the same time.

Drywall installers are also called drywallers or hangers. They cut and hang the panels of wallboard. The tools they use include tape measures, straightedges, utility knives, and power saws.

Ceiling tile installers hang ceiling tiles and create suspended ceilings. Tiles may be applied directly to the ceiling, attached to furring strips, or suspended on runners that are connected by wire to the ceiling. Workers are sometimes called acoustical carpenters, because they also install tiles that block sound.

Tapers, also called finishers, prepare the drywall for covering by paint and wallpaper. Tapers apply paper or fiberglass mesh tape to cover drywall seams. They also smooth the tape after affixing it and apply a finishing compound to the tape.

In addition to performing new installations, many installers and tapers make repairs such as fixing damaged drywall and replacing ceiling tiles. The wall coverings applied to the finished drywall are installed by  painters, plasterers, and paperhangers.

Work Environment About this section

Tapers cover the seams where drywall edges meet.

Drywall and ceiling tile installers held about 111,600 jobs in 2021. The largest employers of drywall and ceiling tile installers were as follows:

Tapers held about 16,800 jobs in 2021. The largest employers of tapers were as follows:

Drywall installers, ceiling tile installers, and tapers work indoors. The work is physically demanding. Workers spend most of the day standing, bending, or reaching, and they must often lift and maneuver heavy wallboard.

Work Schedules

Most drywall installers, ceiling tile installers, and tapers work full time.

How to Become a Drywall Installer, Ceiling Tile Installer, or Taper About this section

New drywall installers, ceiling tile installers, and tapers typically learn their job by working with more experienced workers.

Most drywall installers, ceiling tile installers, and tapers learn their trade on the job. A formal educational credential is typically not required to enter the occupation.

Education

There are no educational credential requirements for becoming a drywall installer, ceiling tile installer, or taper, although some employers prefer to hire candidates who have a high school diploma or equivalent.

A high school diploma or equivalent is typically required for workers starting an apprenticeship.

Training

Most drywall installers, ceiling tile installers, and tapers learn their trade on the job by helping experienced workers and gradually taking on more duties. They start by carrying materials and cleaning up and then learn to use the tools of the trade. They learn to measure, cut, and install or apply materials. They may start out working on less visible areas, such as closets. Their on-the-job training typically lasts up to 12 months.

A few groups, including the United Brotherhood of Carpenters, International Union of Painters and Allied Trades, and contractor associations, sponsor apprenticeship programs for drywall installers, ceiling tile installers, and tapers. Apprenticeships combine on-the-job training with technical instruction and typically last 2 to 4 years.

During their apprenticeship training, drywall installers, ceiling tile installers, and tapers learn a number of safety rules, many of which are standardized through the Occupational Safety & Health Administration (OSHA).

Advancement

Drywall installers, ceiling tile installers, and tapers may advance to become supervisors, general superintendents, project managers, or estimators. Workers may also choose to start their own business after gaining experience in the occupation. 

Workers who join a union may also find career advancement opportunities within their union, such as becoming the business manager for a local chapter or becoming an instructor for the apprenticeship program.

Important Qualities

Ability to work at heights.  Drywall installers, ceiling tile installers, and tapers may be required to work on ladders, scaffolding, lifts, or stilts. 

Attention to detail.  Drywall installers, ceiling tile installers, and tapers must take precise measurements, follow specific instructions, and be meticulous in their work. 

Balance. Drywall installers, ceiling tile installers, and tapers often wear stilts. They must be able to move around and use tools overhead without falling.

Dexterity. Drywall installers, ceiling tile installers, and tapers work with hand tools on every job.

Math skills. Drywall installers, ceiling tile installers, and tapers must be able to estimate the quantity of materials needed when cutting panels.

Physical stamina. Drywall installers, ceiling tile installers, and tapers routinely lift and move heavy materials into place, so workers should be physically fit.

Physical strength. Drywall and ceiling tile installers must often lift heavy panels over their heads to secure onto the ceiling and must carry heavy materials to work areas.

Pay About this section

The median annual wage for drywall and ceiling tile installers was $48,040 in May 2021. The median wage is the wage at which half the workers in an occupation earned more than that amount and half earned less. The lowest 10 percent earned less than $30,460, and the highest 10 percent earned more than $95,600.

The median annual wage for tapers was $61,080 in May 2021. The lowest 10 percent earned less than $37,980, and the highest 10 percent earned more than $100,160.

In May 2021, the median annual wages for drywall and ceiling tile installers in the top industries in which they worked were as follows:

In May 2021, the median annual wages for tapers in the top industries in which they worked were as follows:

Most drywall installers, ceiling tile installers, and tapers work full time.

Job Outlook About this section

Overall employment of drywall installers, ceiling tile installers, and tapers is projected to grow 3 percent from 2021 to 2031, slower than the average for all occupations.

Despite limited employment growth, about 10,900 openings for drywall installers, ceiling tile installers, and tapers are projected each year, on average, over the decade. Most of those openings are expected to result from the need to replace workers who transfer to different occupations or exit the labor force, such as to retire.

Employment

Projected employment of drywall installers, ceiling tile installers, and tapers varies by occupation (see table).

Demand for drywall and ceiling tile installers, especially for work on construction of new buildings, is expected to continue. Home-remodeling projects also are expected to be a source of job growth. The continued use of new tools that allow workers to do more in less time will limit employment growth of tapers.

State & Area Data About this section

Occupational Employment and Wage Statistics (OEWS)

The Occupational Employment and Wage Statistics (OEWS) program produces employment and wage estimates annually for over 800 occupations. These estimates are available for the nation as a whole, for individual states, and for metropolitan and nonmetropolitan areas. The link(s) below go to OEWS data maps for employment and wages by state and area.

• Drywall and ceiling tile installers
• Tapers

Projections Central

Occupational employment projections are developed for all states by Labor Market Information (LMI) or individual state Employment Projections offices. All state projections data are available at www.projectionscentral.org. Information on this site allows projected employment growth for an occupation to be compared among states or to be compared within one state. In addition, states may produce projections for areas; there are links to each state’s websites where these data may be retrieved.

CareerOneStop

CareerOneStop includes hundreds of occupational profiles with data available by state and metro area. There are links in the left-hand side menu to compare occupational employment by state and occupational wages by local area or metro area. There is also a salary info tool to search for wages by zip code.

Contacts for More Information About this section

For details about apprenticeships or other work opportunities in this trade, contact the offices of the state employment service; the state apprenticeship agency; local contractors or firms that employ drywall installers, ceiling tile installers, and tapers; or local union–management finishing trade apprenticeship committees. Apprenticeship information is available from the U.S. Department of Labor’s Apprenticeship program online or by phone at 877-872-5627. Visit Apprenticeship.gov to search for apprenticeship opportunities.

For more information about drywall installers, ceiling tile installers, and tapers, visit

Associated Builders and Contractors

Association of the Wall and Ceiling Industry

Finishing Trades Institute

National Association of Home Builders

NCCER

United Brotherhood of Carpenters

O*NET

Drywall and Ceiling Tile Installers

Tapers