Thursday, June 01, 2017
Workers in the Huntsville Metropolitan Statistical Area had an average (mean) hourly wage of $25.46 in May 2016, about 7 percent above the nationwide average of $23.86, according to the U.S. Bureau of Labor Statistics. Regional Commissioner Janet S. Rankin noted that, after testing for statistical significance, wages in the local area were higher than their respective national averages in 5 of the 22 major occupational groups, including architecture and engineering; business and financial operations; and computer and mathematical. Fourteen groups had significantly lower wages than their respective national averages, including sales and related; construction and extraction; and building and grounds cleaning and maintenance.
When compared to the nationwide distribution, local employment was more highly concentrated in 4 of the 22 occupational groups, including architecture and engineering; and computer and mathematical. Conversely, 13 groups had employment shares significantly below their national representation, including office and administrative support; education, training, and library; and transportation and material moving. (See table A and box note at end of release.)
|Major occupational group||Percent of total employment||Mean hourly wage|
|United States||Huntsville||United States||Huntsville||Percent difference (1)|
Total, all occupations
Business and financial operations
Computer and mathematical
Architecture and engineering
Life, physical, and social science
Community and social service
Education, training, and library
Arts, design, entertainment, sports, and media
Healthcare practitioners and technical
Food preparation and serving related
Building and grounds cleaning and maintenance
Personal care and service
Sales and related
Office and administrative support
Farming, fishing, and forestry
Construction and extraction
Installation, maintenance, and repair
Transportation and material moving
One occupational group—architecture and engineering—was chosen to illustrate the diversity of data available for any of the 22 major occupational categories. Huntsville had 18,130 jobs in architecture and engineering, accounting for 8.3 percent of local area employment, significantly higher than the 1.8-percent share nationally. The average hourly wage for this occupational group locally was $48.45, significantly above the national wage of $40.53.
Some of the larger detailed occupations within the architecture and engineering group included aerospace engineers (3,930), electronics engineers, except computer (1,470), and electrical engineers (1,430). Among the higher paying jobs were aerospace engineers and computer hardware engineers, with mean hourly wages of $56.51 and $54.39, respectively. At the lower end of the wage scale were industrial engineering technicians ($26.26) and electrical and electronics engineering technicians ($28.95). (Detailed occupational data for architecture and engineering are presented in table 1; for a complete listing of detailed occupations available go to www.bls.gov/oes/current/oes_26620.htm.)
Location quotients allow us to explore the occupational make-up of a metropolitan area by comparing the composition of jobs in an area relative to the national average. (See table 1.) For example, a location quotient of 2.0 indicates that an occupation accounts for twice the share of employment in the area than it does nationally. In the Huntsville Metropolitan Statistical Area, above-average concentrations of employment were found in many of the occupations within the architecture and engineering group. For instance, aerospace engineers were employed at 36.9 times the national rate in Huntsville, and computer hardware engineers, at 11.0 times the U.S. average. On the other hand, civil engineers had a location quotient of 0.9 in Huntsville, indicating that this particular occupation’s local and national employment shares were similar.
These statistics are from the Occupational Employment Statistics (OES) survey, a federal-state cooperative program between BLS and State Workforce Agencies, in this case, the Alabama Department of Labor.
A value that is statistically different from another does not necessarily mean that the difference has economic or practical significance. Statistical significance is concerned with the ability to make confident statements about a universe based on a sample. It is entirely possible that a large difference between two values is not significantly different statistically, while a small difference is, since both the size and heterogeneity of the sample affect the relative error of the data being tested.
The Occupational Employment Statistics (OES) survey is a semiannual mail survey measuring occupational employment and wage rates for wage and salary workers in nonfarm establishments in the United States. The OES data available from BLS include cross-industry occupational employment and wage estimates for the nation; over 650 areas, including states and the District of Columbia, metropolitan statistical areas (MSAs), metropolitan divisions, nonmetropolitan areas, and territories; national industry-specific estimates at the NAICS sector, 3-, 4-, and selected 5- and 6-digit industry levels, and national estimates by ownership across all industries and for schools and hospitals. OES data are available at www.bls.gov/oes/tables.htm.
OES estimates are constructed from a sample of about 1.2 million establishments. Each year, two semiannual panels of approximately 200,000 sampled establishments are contacted, one panel in May and the other in November. Responses are obtained by mail, Internet or other electronic means, email, telephone, or personal visit. The May 2016 estimates are based on responses from six semiannual panels collected over a 3-year period: May 2016, November 2015, May 2015, November 2014, May 2014, and November 2013. The overall national response rate for the six panels, based on the 50 states and the District of Columbia, is 73 percent based on establishments and 69 percent based on weighted sampled employment. The unweighted employment of sampled establishments across all six semiannual panels represents approximately 58 percent of total national employment. The sample in the Huntsville Metropolitan Statistical Area included 1,938 establishments with a response rate of 75 percent. For more information about OES concepts and methodology, go to www.bls.gov/news.release/ocwage.tn.htm.
The May 2016 OES estimates are based on the 2010 Standard Occupational Classification (SOC) system and the 2012 North American Industry Classification System (NAICS). Information about the 2010 SOC is available on the BLS website at www.bls.gov/soc and information about the 2012 NAICS is available at www.bls.gov/bls/naics.htm.
Metropolitan area definitions
The substate area data published in this release reflect the standards and definitions established by the U.S. Office of Management and Budget.
The Huntsville, Ala. Metropolitan Statistical Area includes Limestone and Madison Counties.
OES data are available on our regional web page at www.bls.gov/regions/southeast. Answers to frequently asked questions about the OES data are available at www.bls.gov/oes/oes_ques.htm. Detailed technical information about the OES survey is available in our Survey Methods and Reliability Statement on the BLS website at www.bls.gov/oes/current/methods_statement.pdf.
Information in this release will be made available to sensory impaired individuals upon request . Voice phone: (202) 691-5200; Federal Relay Service: (800) 877-8339.
|Occupation (1)||Employment||Mean wages|
|Level (2)||Location quotient (3)||Hourly||Annual (4)|
Architecture and engineering occupations
Architects, except landscape and naval
Cartographers and photogrammetrists
Computer hardware engineers
Electronics engineers, except computer
Health and safety engineers, except mining safety engineers and inspectors
Engineers, all other
Architectural and civil drafters
Electrical and electronics drafters
Drafters, all other
Aerospace engineering and operations technicians
Civil engineering technicians
Electrical and electronics engineering technicians
Industrial engineering technicians
Mechanical engineering technicians
Engineering technicians, except drafters, all other
Surveying and mapping technicians
Last Modified Date: Thursday, June 01, 2017