An official website of the United States government
26-1137-ATL
Thursday, July 09, 2026
Workers in the Decatur, AL Metropolitan Statistical Area had an average (mean) hourly wage of $27.80 in May 2025, compared to the nationwide average of $33.54, the U.S. Bureau of Labor Statistics reported today. Regional Commissioner Victoria G. Lee noted that higher paying major occupational groups included management ($60.21), architecture and engineering ($52.15), and computer and mathematical ($47.37). Lower paying occupational groups included food preparation and serving related ($14.01), personal care and service ($15.79), and healthcare support ($15.98). (See table A.)
Production occupations accounted for 16.7 percent of Decatur area employment, followed by transportation and material moving occupations (10.4 percent). Major occupational groups on the lower end of local employment included legal (0.2 percent); arts, design, entertainment, sports, and media (0.5 percent); and life, physical, and social science (0.9 percent).
| Major occupational group | Percent of total employment | Mean hourly wage ($) | |||
|---|---|---|---|---|---|
| United States | Decatur | United States | Decatur | ||
Total, all occupations | 100.0 | 100.0 | 33.54 | 27.80 | |
Management | 7.2 | 4.9 | 69.84 | 60.21 | |
Business and financial operations | 6.8 | 3.6 | 45.78 | 38.82 | |
Computer and mathematical | 3.4 | 1.2 | 57.73 | 47.37 | |
Architecture and engineering | 1.7 | 3.6 | 51.36 | 52.15 | |
Life, physical, and social science | 0.9 | 0.9 | 45.48 | 39.96 | |
Community and social service | 1.7 | 1.2 | 30.49 | 26.75 | |
Legal | 0.8 | 0.2 | 67.07 | 44.95 | |
Educational instruction and library | 5.9 | 4.4 | 32.47 | 25.14 | |
Arts, design, entertainment, sports, and media | 1.3 | 0.5 | 38.36 | 25.17 | |
Healthcare practitioners and technical | 6.3 | 4.8 | 52.26 | 37.51 | |
Healthcare support | 5.1 | 3.6 | 19.62 | 15.98 | |
Protective service | 2.4 | 2.2 | 29.19 | 24.73 | |
Food preparation and serving related | 8.8 | 8.2 | 17.86 | 14.01 | |
Building and grounds cleaning and maintenance | 2.9 | 2.9 | 19.66 | 16.69 | |
Personal care and service | 2.1 | 1.2 | 19.74 | 15.79 | |
Sales and related | 8.6 | 8.4 | 26.43 | 22.63 | |
Office and administrative support | 11.4 | 9.4 | 24.79 | 22.14 | |
Farming, fishing, and forestry | 0.3 | 0.2 | 19.96 | 19.26 | |
Construction and extraction | 4.1 | 5.1 | 31.42 | 27.45 | |
Installation, maintenance, and repair | 3.9 | 6.3 | 30.44 | 32.26 | |
Production | 5.5 | 16.7 | 24.81 | 26.86 | |
Transportation and material moving | 8.8 | 10.4 | 23.96 | 21.96 | |
One occupational group—production—was chosen to illustrate the diversity of data available for any of the 22 major occupational categories. Decatur had 10,210 jobs in production, accounting for 16.7 percent of local area employment, compared to the 5.5-percent share nationally. The average hourly wage for this occupational group locally was $26.86, compared to the national wage of $24.81.
Some of the larger detailed occupations within the production group were miscellaneous assemblers and fabricators (1,830) and first-line supervisors of production and operations workers (950). Among the highest paying jobs in this group were power plant operators ($50.73) and first-line supervisors of production and operations workers ($43.82). At the lower end of the wage scale were laundry and dry-cleaning workers ($14.14) and meat, poultry, and fish cutters and trimmers ($15.38). (Detailed data for the production occupations are presented in table 1; for a complete listing of detailed occupations available go to data.bls.gov/oes/#/area/0019460/2025.)
Location quotients allow us to explore the occupational make-up of a metropolitan area by comparing the composition of jobs in an area relative to the national average. (See table 1.) For example, a location quotient of 2.00 indicates that an occupation accounts for twice the share of employment in the area than it does nationally. In the Decatur area, above-average concentrations of employment were found in many of the occupations within the production group. For instance, meat, poultry, and fish cutters and trimmers were employed at 15.18 times the national rate in Decatur, and chemical equipment operators and tenders, at 13.77 times the U.S. average. Butchers and meat cutters had a location quotient of 0.91 in Decatur, indicating that this particular occupation’s local and national employment shares were similar.
The statistics in this release are from the Occupational Employment and Wage Statistics (OEWS) survey, a cooperative effort between BLS and the State Workforce Agencies (SWAs). BLS funds the survey and provides the procedures and technical support. State Workforce Agencies collect most of the data: in this case, the Alabama Department of Labor.
Because of the lapse in federal appropriations from October 1 through November 12, 2025, additional collection and processing time were required for the May 2025 OEWS survey panel once appropriations resumed. The response rate for the May 2025 survey panel was within the normal range and no additional modifications to the OEWS methodology and procedures were necessary as a result of the shutdown.
The Occupational Employment and Wage Statistics (OEWS) survey is a semiannual survey measuring occupational employment and wage rates for wage and salary workers in nonfarm establishments in the United States. The OEWS data available from BLS include cross-industry occupational employment and wage estimates for the nation; over 530 areas, including states and the District of Columbia, metropolitan statistical areas (MSAs), nonmetropolitan areas, and territories; national industry-specific estimates at the NAICS sector, 3-digit, most 4-digit, and selected 5- and 6-digit industry levels; and national estimates by ownership across all industries and for schools and hospitals. Full OEWS data tables are available online.
Additional information about the OEWS estimates and methodology is available in the national Technical Notes. The overall national response rate for the six panels, based on the 50 states and the District of Columbia, is 66.2 percent based on establishments and 67.2 percent based on weighted sampled employment. Sample sizes and response rates by metropolitan and nonmetropolitan area are available on the Additional OEWS data sets page.
Metropolitan area definitions
The substate area data published in this release reflect the standards and definitions established by the U.S. Office of Management and Budget.
The Decatur, AL Metropolitan Statistical Area includes Lawrence County and Morgan County.
For more information
Answers to frequently asked questions about the OEWS data, as well as general program documentation, are available on the OEWS website.
If you are deaf, hard of hearing, or have a speech disability, please dial 7-1-1 to access telecommunications relay services.
| Occupation (1) | Employment | Mean wages ($) | ||
|---|---|---|---|---|
| Level (2) | Location quotient (3) | Hourly | Annual (4) | |
Production occupations | 10,210 | 3.03 | 26.86 | 55,860 |
First-line supervisors of production and operating workers | 950 | 3.57 | 43.82 | 91,140 |
Electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers | 360 | 3.74 | 15.65 | 32,560 |
Structural metal fabricators and fitters | 100 | 4.83 | 24.39 | 50,730 |
Miscellaneous assemblers and fabricators | 1,830 | 3.30 | 20.29 | 42,210 |
Butchers and meat cutters | 50 | 0.91 | 18.34 | 38,150 |
Meat, poultry, and fish cutters and trimmers | 870 | 15.18 | 15.38 | 31,980 |
Food batchmakers | 90 | 1.35 | 18.80 | 39,090 |
Rolling machine setters, operators, and tenders, metal and plastic | 70 | 7.27 | 42.73 | 88,880 |
Cutting, punching, and press machine setters, operators, and tenders, metal and plastic | 320 | 4.77 | 22.19 | 46,150 |
Milling and planing machine setters, operators, and tenders, metal and plastic | 60 | 12.55 | 17.99 | 37,420 |
Machinists | 290 | 2.53 | 30.04 | 62,470 |
Molding, coremaking, and casting machine setters, operators, and tenders, metal and plastic | 220 | 3.66 | 28.89 | 60,090 |
Multiple machine tool setters, operators, and tenders, metal and plastic | 150 | 3.01 | 22.77 | 47,370 |
Tool and die makers | 30 | 1.38 | 29.43 | 61,210 |
Welders, cutters, solderers, and brazers | 530 | 3.23 | 27.35 | 56,890 |
Welding, soldering, and brazing machine setters, operators, and tenders | 70 | 5.46 | 22.37 | 46,520 |
Printing press operators | 80 | 1.37 | 19.43 | 40,420 |
Laundry and dry-cleaning workers | 50 | 0.64 | 14.14 | 29,400 |
Sewing machine operators | (5) | (5) | 15.73 | 32,710 |
Sawing machine setters, operators, and tenders, wood | 120 | 7.22 | 21.95 | 45,660 |
Power plant operators | 30 | 2.70 | 50.73 | 105,510 |
Water and wastewater treatment plant and system operators | 90 | 1.79 | 30.06 | 62,520 |
Chemical equipment operators and tenders | 760 | 13.77 | 40.25 | 83,730 |
Crushing, grinding, and polishing machine setters, operators, and tenders | 30 | 3.27 | 35.50 | 73,830 |
Mixing and blending machine setters, operators, and tenders | 120 | 3.16 | 28.17 | 58,590 |
Extruding, forming, pressing, and compacting machine setters, operators, and tenders | 70 | 2.87 | 21.78 | 45,290 |
Inspectors, testers, sorters, samplers, and weighers | 490 | 2.10 | 24.57 | 51,110 |
Packaging and filling machine operators and tenders | 190 | 1.28 | 20.06 | 41,730 |
Coating, painting, and spraying machine setters, operators, and tenders | 190 | 3.08 | 21.92 | 45,590 |
Computer numerically controlled tool operators | 190 | 2.82 | 27.82 | 57,870 |
Paper goods machine setters, operators, and tenders | 70 | 1.91 | 21.49 | 44,700 |
Helpers--production workers | 240 | 3.73 | 17.79 | 36,990 |
Footnotes: | ||||
Last Modified Date: Thursday, July 09, 2026