Wednesday, August 26, 2015
Workers in the Rockford Metropolitan Statistical Area had an average (mean) hourly wage of $20.65 in May 2014, about 9 percent below the nationwide average of $22.71, according to the U.S. Bureau of Labor Statistics. Regional Commissioner Charlene Peiffer noted that, after testing for statistical significance, wages in the local area were higher than their respective national averages in 2 of the 22 major occupational groups: construction and extraction; and production. Thirteen groups had significantly lower wages than their respective national averages, including management; computer and mathematical; and arts, design, entertainment, sports, and media.
When compared to the nationwide distribution, local employment was more highly concentrated in 3 of the 22 occupational groups: production; transportation and material moving; and healthcare practitioners and technical. Conversely, 11 groups had employment shares significantly below their national representation, including business and financial operations; computer and mathematical; and food preparation and serving related. (See table A and box note at end of release.)
|Major occupational group||Percent of total employment||Mean hourly wage|
|United States||Rockford||United States||Rockford||Percent difference (1)|
Total, all occupations
Business and financial operations
Computer and mathematical
Architecture and engineering
Life, physical, and social science
Community and social services
Education, training, and library
Arts, design, entertainment, sports, and media
Healthcare practitioners and technical
Food preparation and serving related
Building and grounds cleaning and maintenance
Personal care and service
Sales and related
Office and administrative support
Farming, fishing, and forestry
Construction and extraction
Installation, maintenance, and repair
Transportation and material moving
One occupational group—production—was chosen to illustrate the diversity of data available for any of the 22 major occupational categories. Rockford had 22,930 jobs in production, accounting for 15.8 percent of local area employment, significantly higher than the 6.6-percent share nationally. The average hourly wage for this occupational group locally was $18.13, significantly above the national wage of $17.06.
Some of the largest detailed occupations within the production group included team assemblers (5,590), machinists (2,590), and first-line supervisors of production and operating workers (1,250). Among the higher paying jobs were stationary engineers and boiler operators; and first-line supervisors of production and operating workers, with mean hourly wages of $31.62 and $28.49, respectively. At the lower end of the wage scale were laundry and dry-cleaning workers ($10.27) and woodworking machine setters, operators, and tenders, except sawing ($10.90). (Detailed occupational data for production are presented in table 1; for a complete listing of detailed occupations available go to www.bls.gov/oes/2014/may/oes_40420.htm .)
Location quotients allow us to explore the occupational make-up of a metropolitan area by comparing the composition of jobs in an area relative to the national average. (See table 1.) For example, a location quotient of 2.0 indicates that an occupation accounts for twice the share of employment in the area than it does nationally. In the Rockford Metropolitan Statistical Area, above-average concentrations of employment were found in many of the occupations within the production group. For instance, heat treating equipment setters, operators, and tenders, metal and plastic were employed at 11.6 times the national rate in Rockford, and tool and die makers, at 8.2 times the U.S. average. On the other hand, packaging and filling machine operators and tenders had a location quotient of 1.2 in Rockford, indicating that this particular occupation’s local and national employment shares were similar.
These statistics are from the Occupational Employment Statistics (OES) survey, a federal-state cooperative program between BLS and State Workforce Agencies, in this case, the Illinois Department of Employment Security.
A value that is statistically different from another does not necessarily mean that the difference has economic or practical significance. Statistical significance is concerned with the ability to make confident statements about a universe based on a sample. It is entirely possible that a large difference between two values is not significantly different statistically, while a small difference is, since both the size and heterogeneity of the sample affect the relative error of the data being tested.
The Occupational Employment Statistics (OES) survey is a semiannual mail survey measuring occupational employment and wage rates for wage and salary workers in nonfarm establishments in the United States. Guam, Puerto Rico, and the Virgin Islands are also surveyed, but their data are not included in the national estimates. OES estimates are constructed from a sample of about 1.2 million establishments. Forms are mailed to approximately 200,000 sampled establishments in May and November each year. May 2014 estimates are based on responses from six semiannual panels collected over a 3-year period: May 2014, November 2013, May 2013, November 2012, May 2012, and November 2011. The overall national response rate for the six panels is 74.3 percent based on establishments and 70.5 percent based on weighted sampled employment. The unweighted employment of sampled establishments across all six semiannual panels represents approximately 57.1 percent of total national employment. (Response rates are slightly lower for these estimates due to the federal shutdown in October 2013.) The sample in the Rockford Metropolitan Statistical Area included 1,721 establishments with a response rate of 71 percent. For more information about OES concepts and methodology, go to www.bls.gov/news.release/ocwage.tn.htm.
The OES survey provides estimates of employment and hourly and annual wages for wage and salary workers in 22 major occupational groups and 821 detailed occupations for the nation, states, metropolitan statistical areas, metropolitan divisions, and nonmetropolitan areas. In addition, employment and wage estimates for 94 minor groups and 458 broad occupations are available in the national data. OES data by state and metropolitan/nonmetropolitan area are available from www.bls.gov/oes/current/oessrcst.htm and www.bls.gov/oes/current/oessrcma.htm, respectively.
The May 2014 OES estimates are based on the 2010 Standard Occupational Classification (SOC) system and the 2012 North American Industry Classification System (NAICS). Information about the 2010 SOC is available on the BLS website at www.bls.gov/soc and information about the 2012 NAICS is available at www.bls.gov/bls/naics.htm.
The substate area data published in this release reflect the standards and definitions established by the U.S. Office of Management and Budget.
The Rockford, Ill. Metropolitan Statistical Area includes Boone and Winnebago Counties.
OES data are available on our regional web page at www.bls.gov/regions/midwest. Answers to frequently asked questions about the OES data are available at www.bls.gov/oes/oes_ques.htm. Detailed technical information about the OES survey is available in our Survey Methods and Reliability Statement on the BLS website at www.bls.gov/oes/2014/may/methods_statement.pdf.
Information in this release will be made available to sensory impaired individuals upon request . Voice phone: 202-691-5200; Federal Relay Service: 800-877-8339.
|Occupation (1)||Employment||Mean wages|
|Level (2)||Location quotient (3)||Hourly||Annual (4)|
First-Line Supervisors of Production and Operating Workers
Electrical and Electronic Equipment Assemblers
Electromechanical Equipment Assemblers
Engine and Other Machine Assemblers
Structural Metal Fabricators and Fitters
Assemblers and Fabricators, All Other
Butchers and Meat Cutters
Computer-Controlled Machine Tool Operators, Metal and Plastic
Computer Numerically Controlled Machine Tool Programmers, Metal and Plastic
Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic
Forging Machine Setters, Operators, and Tenders, Metal and Plastic
Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic
Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic
Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic
Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic
Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic
Molding, Coremaking, and Casting Machine Setters, Operators, and Tenders, Metal and Plastic
Multiple Machine Tool Setters, Operators, and Tenders, Metal and Plastic
Tool and Die Makers
Welders, Cutters, Solderers, and Brazers
Welding, Soldering, and Brazing Machine Setters, Operators, and Tenders
Heat Treating Equipment Setters, Operators, and Tenders, Metal and Plastic
Plating and Coating Machine Setters, Operators, and Tenders, Metal and Plastic
Tool Grinders, Filers, and Sharpeners
Prepress Technicians and Workers
Printing Press Operators
Laundry and Dry-Cleaning Workers
Pressers, Textile, Garment, and Related Materials
Sewing Machine Operators
Cabinetmakers and Bench Carpenters
Model Makers, Wood
Woodworking Machine Setters, Operators, and Tenders, Except Sawing
Stationary Engineers and Boiler Operators
Water and Wastewater Treatment Plant and System Operators
Grinding and Polishing Workers, Hand
Mixing and Blending Machine Setters, Operators, and Tenders
Extruding, Forming, Pressing, and Compacting Machine Setters, Operators, and Tenders
Inspectors, Testers, Sorters, Samplers, and Weighers
Packaging and Filling Machine Operators and Tenders
Coating, Painting, and Spraying Machine Setters, Operators, and Tenders
Painters, Transportation Equipment
Paper Goods Machine Setters, Operators, and Tenders
Production Workers, All Other
Last Modified Date: Wednesday, August 26, 2015