An official website of the United States government
26-1113-SAN
Tuesday, June 30, 2026
Workers in the Longview-Kelso, WA Metropolitan Statistical Area had an average (mean) hourly wage of $32.74 in May 2025, compared to the nationwide average of $33.54, the U.S. Bureau of Labor Statistics reported today. Regional Commissioner Chris Rosenlund noted that higher paying major occupational groups included management ($71.19), healthcare practitioners and technical ($57.49), and legal ($57.38). Lower paying occupations included food preparation and serving related ($21.20), building and grounds cleaning and maintenance ($22.17), and personal care and service ($22.29). (See table A.)
Occupational groups with the highest employment shares in the Longview area included office and administrative support (11.1 percent), production (10.6 percent), and transportation and material moving (10.4 percent). Major occupational groups on the lower end of local employment included legal (0.4 percent); arts, design, entertainment, sports, and media (0.8 percent); and life, physical, and social science (0.9 percent).
One occupational group—production—was chosen to illustrate the diversity of data available for any of the 22 major occupational categories. Longview had 4,360 jobs in production, accounting for 10.6 percent of local area employment, compared to the 5.5-percent share nationally. The average hourly wage for this occupational group locally was $29.01, compared to the national wage of $24.81.
Some of the larger detailed occupations within the production group included paper goods machine setters, operators, and tenders (590), packaging and filling machine operators and tenders (540), and first-line supervisors of production and operating workers (440). Among the higher paying jobs in this group were power plant operators ($46.87) and first-line supervisors of production and operating workers ($43.16). At the lower end of the wage scale were food batchmakers ($19.65) and bakers ($21.21). (Detailed data for the production occupations are presented in table 1; for a complete listing of detailed occupations available go to https://data.bls.gov/oes/#/area/0031020/2025.)
Location quotients allow us to explore the occupational make-up of a metropolitan area by comparing the composition of jobs in an area relative to the national average. (See table 1.) For example, a location quotient of 2.00 indicates that an occupation accounts for twice the share of employment in the area than it does nationally. In the Longview area, above-average concentrations of employment were found in many of the occupations within the production group. For instance, paper goods machine setters, operators, and tenders were employed at 23.41 times the national rate in Longview, and wood sawing machine setters, operators, and tenders, at 16.76 times the U.S. average. Welders, cutters, solderers, and brazers had a location quotient of 1.09 in Longview, indicating that this particular occupation’s local and national employment shares were similar.
The statistics in this release are from the Occupational Employment and Wage Statistics (OEWS) survey, a cooperative effort between BLS and the State Workforce Agencies (SWAs). BLS funds the survey and provides the procedures and technical support. State Workforce Agencies collect most of the data: in this case, the Washington Employment Security Department.
Because of the lapse in federal appropriations from October 1 through November 12, 2025, additional collection and processing time were required for the May 2025 OEWS survey panel once appropriations resumed. The response rate for the May 2025 survey panel was within the normal range and no additional modifications to the OEWS methodology and procedures were necessary as a result of the shutdown.
The Occupational Employment and Wage Statistics (OEWS) survey is a semiannual survey measuring occupational employment and wage rates for wage and salary workers in nonfarm establishments in the United States. The OEWS data available from BLS include cross-industry occupational employment and wage estimates for the nation; over 530 areas, including states and the District of Columbia, metropolitan statistical areas (MSAs), nonmetropolitan areas, and territories; national industry-specific estimates at the NAICS sector, 3-digit, most 4-digit, and selected 5- and 6-digit industry levels; and national estimates by ownership across all industries and for schools and hospitals. Full OEWS data tables are available online.
Additional information about the OEWS estimates and methodology is available in the national Technical Notes. The overall national response rate for the six panels, based on the 50 states and the District of Columbia, is 66.2 percent based on establishments and 67.2 percent based on weighted sampled employment. Sample sizes and response rates by metropolitan and nonmetropolitan area are available on the Additional OEWS data sets page.
Metropolitan area definitions
The substate area data published in this release reflect the standards and definitions established by the U.S. Office of Management and Budget.
The Longview-Kelso, WA Metropolitan Statistical Area includes Cowlitz County.
For more information
Answers to frequently asked questions about the OEWS data, as well as general program documentation, are available on the OEWS website.
If you are deaf, hard of hearing, or have a speech disability, please dial 7-1-1 to access telecommunications relay services.
| Occupation (1) | Employment | Mean wages ($) | ||
|---|---|---|---|---|
| Level (2) | Location quotient (3) | Hourly | Annual (4) | |
Production occupations | 4,360 | 1.93 | 29.01 | 60,330 |
First-line supervisors of production and operating workers | 440 | 2.47 | 43.16 | 89,760 |
Miscellaneous assemblers and fabricators | 210 | 0.57 | 22.91 | 47,650 |
Bakers | 60 | 0.91 | 21.21 | 44,110 |
Butchers and meat cutters | 40 | 1.13 | 23.92 | 49,750 |
Food batchmakers | 50 | 0.98 | 19.65 | 40,870 |
Food processing workers, all other | 50 | 3.12 | 22.98 | 47,810 |
Cutting, punching, and press machine setters, operators, and tenders, metal and plastic | 60 | 1.30 | 26.80 | 55,740 |
Grinding, lapping, polishing, and buffing machine tool setters, operators, and tenders, metal and plastic | 50 | 2.88 | 26.83 | 55,800 |
Machinists | 140 | 1.84 | 31.83 | 66,210 |
Welders, cutters, solderers, and brazers | 120 | 1.09 | 28.89 | 60,090 |
Tool grinders, filers, and sharpeners | 40 | 25.30 | 32.29 | 67,160 |
Printing press operators | 30 | 0.87 | 22.59 | 46,990 |
Sawing machine setters, operators, and tenders, wood | 180 | 16.76 | 26.97 | 56,090 |
Woodworking machine setters, operators, and tenders, except sawing | 70 | 4.52 | 27.45 | 57,100 |
Power plant operators | (5) | (5) | 46.87 | 97,480 |
Stationary engineers and boiler operators | 30 | 4.65 | 36.81 | 76,550 |
Water and wastewater treatment plant and system operators | 30 | 0.97 | 34.74 | 72,250 |
Chemical equipment operators and tenders | 110 | 3.00 | 34.16 | 71,050 |
Mixing and blending machine setters, operators, and tenders | 110 | 4.43 | 27.08 | 56,320 |
Furnace, kiln, oven, drier, and kettle operators and tenders | 60 | 17.11 | 33.42 | 69,510 |
Inspectors, testers, sorters, samplers, and weighers | 190 | 1.18 | 27.86 | 57,960 |
Packaging and filling machine operators and tenders | 540 | 5.35 | 22.23 | 46,250 |
Coating, painting, and spraying machine setters, operators, and tenders | 80 | 1.94 | 29.40 | 61,140 |
Paper goods machine setters, operators, and tenders | 590 | 23.41 | 31.90 | 66,350 |
Helpers--production workers | 130 | 3.05 | 21.73 | 45,190 |
Footnotes: | ||||
Last Modified Date: Tuesday, June 30, 2026