Department of Labor Logo United States Department of Labor
Dot gov

The .gov means it's official.
Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you're on a federal government site.

Https

The site is secure.
The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

News Release Information

19-538-CHI
Friday, July 19, 2019

Contacts Technical information: Media contact:
  • (312) 353-1138

Occupational Employment and Wages in Dayton — May 2018

Workers in the Dayton Metropolitan Statistical Area had an average (mean) hourly wage of $24.09 in May 2018, comparable to the nationwide average of $24.98, according to the U.S. Bureau of Labor Statistics. Assistant Commissioner for Regional Operations Charlene Peiffer noted that, after testing for statistical significance, wages in the local area were lower than their respective national averages in 17 of the 22 major occupational groups, including legal; management; and arts, design, entertainment, sports, and media. One group had an average wage that was significantly higher than its respective national average.

When compared to the nationwide distribution, local employment was more highly concentrated in 7 of the 22 occupational groups, including healthcare practitioners and technical, production, and architecture and engineering. Conversely, nine groups had employment shares significantly below their national representation, including construction and extraction, personal care and service, and office and administrative support. (See table A and box note at end of release.)

Table A. Occupational employment and wages by major occupational group, United States and the Dayton Metropolitan Statistical Area, and measures of statistical significance, May 2018
Major occupational groupPercent of total employmentMean hourly wage
United StatesDaytonUnited StatesDaytonPercent difference (1)

Total, all occupations

100.0100.0$24.98$24.09-4

Management

5.34.2*58.4452.74*-10

Business and financial operations

5.35.8*36.9835.61-4

Computer and mathematical

3.03.8*44.0140.01*-9

Architecture and engineering

1.82.9*42.0143.393

Life, physical, and social science

0.80.836.6238.234

Community and social service

1.51.523.6922.39*-5

Legal

0.80.5*52.2540.66*-22

Education, training, and library

6.16.4*27.2231.2415

Arts, design, entertainment, sports, and media

1.31.228.7423.86*-17

Healthcare practitioners and technical

6.08.1*39.4237.73*-4

Healthcare support

2.83.6*15.5714.72*-5

Protective service

2.42.0*23.3620.94*-10

Food preparation and serving related

9.29.312.3011.62*-6

Building and grounds cleaning and maintenance

3.12.914.4313.82*-4

Personal care and service

3.82.3*13.5112.12*-10

Sales and related

10.010.120.0917.71*-12

Office and administrative support

15.114.0*18.7517.77*-5

Farming, fishing, and forestry

0.30.1*14.4916.61*15

Construction and extraction

4.12.5*24.6223.76*-3

Installation, maintenance, and repair

3.93.5*23.5421.60*-8

Production

6.37.9*18.8417.99*-5

Transportation and material moving

7.16.5*18.4115.89*-14

Footnotes:
(1) A positive percent difference measures how much the mean wage in the Dayton Metropolitan Statistical Area is above the national mean wage, while a negative difference reflects a lower wage.
* The mean hourly wage or percent share of employment is significantly different from the national average of all areas at the 90-percent confidence level.

One occupational group—production—was chosen to illustrate the diversity of data available for any of the 22 major occupational categories. Dayton had 29,990 jobs in production, accounting for 7.9 percent of local area employment, significantly higher than the 6.3-percent share nationally. The average hourly wage for this occupational group locally was $17.99, significantly below the national wage of $18.84.

Some of the larger detailed occupations within the production group included assemblers and fabricators, all other, including team assemblers (3,680); machinists (2,480); and inspectors, testers, sorters, samplers, and weighers (1,920). Among the higher-paying jobs in this group were first-line supervisors of production and operating workers as well as computer numerically controlled machine tool programmers, metal and plastic, with mean hourly wages of $30.25 and $30.20, respectively. At the lower end of the wage scale were laundry and dry-cleaning workers ($11.23) and pressers, textile, garment, and related materials ($11.27). (Detailed data for the production occupations are presented in table 1; for a complete listing of detailed occupations available go to www.bls.gov/oes/current/oes_19380.htm .)

Location quotients allow us to explore the occupational make-up of a metropolitan area by comparing the composition of jobs in an area relative to the national average. (See table 1.) For example, a location quotient of 2.0 indicates that an occupation accounts for twice the share of employment in the area than it does nationally. In the Dayton Metropolitan Statistical Area, above-average concentrations of employment were found in many of the occupations within the production group. For instance, engine and other machine assemblers were employed at 8.2 times the national rate in Dayton, and computer-controlled machine tool operators, metal and plastic, at 3.6 times the U.S. average. On the other hand, butchers and meat cutters had a location quotient of 1.0 in Dayton, indicating that this particular occupation’s local and national employment shares were similar.

These statistics are from the Occupational Employment Statistics (OES) survey, a federal-state cooperative program between BLS and State Workforce Agencies, in this case, the Ohio Department of Job & Family Services.

Area Changes to the May 2018 Occupational Employment Statistics (OES)

OES continues to publish data for metropolitan and nonmetropolitan areas that cover the full geography of the United States. However, the level of detail available has decreased.

OES no longer publishes data for metropolitan divisions. Data for the 11 large metropolitan areas that contain divisions are now available at the Metropolitan Statistical Area (MSA) or New England City and Town Area (NECTA) level only.

In addition, some smaller nonmetropolitan areas have been combined to form larger nonmetropolitan areas. The May 2018 OES estimates contain data for 134 nonmetropolitan areas, compared with 167 nonmetropolitan areas in the May 2017 estimates.

More information on these area changes is available at www.bls.gov/oes/areas_2018.htm.

Implementing the 2018 Standard Occupational Classification (SOC) System

The OES program plans to begin implementing the 2018 Standard Occupational Classification (SOC) system with the May 2019 estimates, to be released by early April of 2020. Because each set of OES estimates is produced by combining three years of survey data, estimates for May 2019 and May 2020 will be based on a combination of survey data collected under the 2010 SOC and data collected under the 2018 SOC, and will use a hybrid of the two classification systems. The May 2021 OES estimates, to be released by early April of 2022, will be the first set of estimates based fully on the 2018 SOC. For more information, please see www.bls.gov/oes/soc_2018.htm.


Technical Note

The Occupational Employment Statistics (OES) survey is a semiannual survey measuring occupational employment and wage rates for wage and salary workers in nonfarm establishments in the United States. The OES data available from BLS include cross-industry occupational employment and wage estimates for the nation; over 580 areas, including states and the District of Columbia, metropolitan statistical areas (MSAs), nonmetropolitan areas, and territories; national industry-specific estimates at the NAICS sector, 3-digit, most 4-digit, and selected 5- and 6-digit industry levels, and national estimates by ownership across all industries and for schools and hospitals. OES data are available at www.bls.gov/oes/tables.htm.

The OES survey is a cooperative effort between BLS and the State Workforce Agencies (SWAs). BLS funds the survey and provides the procedures and technical support, while the State Workforce Agencies collect most of the data. OES estimates are constructed from a sample of about 1.2 million establishments. Each year, two semiannual panels of approximately 180,000 to 200,000 sampled establishments are contacted, one panel in May and the other in November. Responses are obtained by mail, Internet or other electronic means, email, telephone, or personal visit. The May 2018 estimates are based on responses from six semiannual panels collected over a 3-year period: May 2018, November 2017, May 2017, November 2016, May 2016, and November 2015. The unweighted sample employment of 83 million across all six semiannual panels represents approximately 58 percent of total national employment. The overall national response rate for the six panels, based on the 50 states and the District of Columbia, is 71 percent based on establishments and 68 percent based on weighted sampled employment. The sample in the Dayton Metropolitan Statistical Area included 2,890 establishments with a response rate of 76 percent. For more information about OES concepts and methodology, go to www.bls.gov/oes/current/oes_tec.htm.

A value that is statistically different from another does not necessarily mean that the difference has economic or practical significance. Statistical significance is concerned with the ability to make confident statements about a universe based on a sample. It is entirely possible that a large difference between two values is not significantly different statistically, while a small difference is, since both the size and heterogeneity of the sample affect the relative error of the data being tested.

The May 2018 OES estimates are based on the 2010 Standard Occupational Classification (SOC) system and the 2017 North American Industry Classification System (NAICS). Information about the 2010 SOC is available on the BLS website at www.bls.gov/soc and information about the 2017 NAICS is available at www.bls.gov/bls/naics.htm.

Metropolitan area definitions

The substate area data published in this release reflect the standards and definitions established by the U.S. Office of Management and Budget.

The Dayton, OH Metropolitan Statistical Area includes Greene, Miami, and Montgomery Counties.

Additional information

OES data are available on our regional web page at www.bls.gov/regions/midwest. Answers to frequently asked questions about the OES data are available at www.bls.gov/oes/oes_ques.htm. Detailed technical information about the OES survey is available in our Survey Methods and Reliability Statement on the BLS website at www.bls.gov/oes/current/methods_statement.pdf.

Information in this release will be made available to sensory impaired individuals upon request . Voice phone: (202) 691-5200; Federal Relay Service: (800) 877-8339.

Table 1. Employment and wage data from the Occupational Employment Statistics survey, by occupation, Dayton Metropolitan Statistical Area, May 2018
Occupation (1)EmploymentMean wages
Level (2)Location quotient (3)HourlyAnnual (4)

Production occupations

29,9901.3$17.99$37,420

First-line supervisors of production and operating workers

1,8601.230.2562,920

Electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers

1,1701.616.9035,160

Engine and other machine assemblers

1,0408.218.9939,490

Structural metal fabricators and fitters

2801.418.8539,220

Assemblers and fabricators, all other, including team assemblers

3,6801.014.5130,180

Bakers

2700.612.7226,450

Butchers and meat cutters

3501.016.8935,130

Food and tobacco roasting, baking, and drying machine operators and tenders

1803.316.0733,420

Food batchmakers

5101.216.3834,080

Food cooking machine operators and tenders

3103.713.1527,350

Computer-controlled machine tool operators, metal and plastic

1,3803.618.6738,830

Computer numerically controlled machine tool programmers, metal and plastic

901.430.2062,820

Extruding and drawing machine setters, operators, and tenders, metal and plastic

3801.916.8435,020

Cutting, punching, and press machine setters, operators, and tenders, metal and plastic

9401.917.2535,880

Drilling and boring machine tool setters, operators, and tenders, metal and plastic

501.819.6840,930

Grinding, lapping, polishing, and buffing machine tool setters, operators, and tenders, metal and plastic

5603.017.5836,560

Lathe and turning machine tool setters, operators, and tenders, metal and plastic

1201.521.4844,680

Machinists

2,4802.521.5844,890

Metal-refining furnace operators and tenders

300.717.5136,430

Model makers, metal and plastic

604.421.4844,680

Foundry mold and coremakers

(5)(5)19.0239,570

Molding, coremaking, and casting machine setters, operators, and tenders, metal and plastic

1,1802.813.8028,710

Multiple machine tool setters, operators, and tenders, metal and plastic

7802.216.0533,380

Tool and die makers

5502.924.6051,170

Welders, cutters, solderers, and brazers

8700.920.1341,870

Welding, soldering, and brazing machine setters, operators, and tenders

(5)(5)18.7138,920

Heat treating equipment setters, operators, and tenders, metal and plastic

(5)(5)17.5136,420

Plating and coating machine setters, operators, and tenders, metal and plastic

3703.616.2333,770

Prepress technicians and workers

1902.419.3540,250

Printing press operators

5801.318.0337,510

Print binding and finishing workers

(5)(5)13.9629,030

Laundry and dry-cleaning workers

5501.011.2323,360

Pressers, textile, garment, and related materials

1501.611.2723,450

Sewing machine operators

6001.712.0825,120

Cabinetmakers and bench carpenters

2500.918.2738,010

Woodworking machine setters, operators, and tenders, except sawing

(5)(5)14.6930,560

Stationary engineers and boiler operators

800.927.8157,840

Water and wastewater treatment plant and system operators

2700.823.9049,720

Chemical equipment operators and tenders

2000.922.5946,980

Separating, filtering, clarifying, precipitating, and still machine setters, operators, and tenders

900.719.6240,800

Crushing, grinding, and polishing machine setters, operators, and tenders

500.614.5130,170

Grinding and polishing workers, hand

(5)(5)12.5326,060

Mixing and blending machine setters, operators, and tenders

2000.616.0433,360

Cutters and trimmers, hand

(5)(5)12.1325,220

Cutting and slicing machine setters, operators, and tenders

3102.016.3934,100

Extruding, forming, pressing, and compacting machine setters, operators, and tenders

3701.915.6232,500

Inspectors, testers, sorters, samplers, and weighers

1,9201.318.9939,510

Dental laboratory technicians

(5)(5)23.1348,100

Medical appliance technicians

(5)(5)17.8837,190

Ophthalmic laboratory technicians

600.916.6134,550

Packaging and filling machine operators and tenders

3100.315.0531,300

Coating, painting, and spraying machine setters, operators, and tenders

2201.020.8143,270

Painters, transportation equipment

1200.818.2337,920

Photographic process workers and processing machine operators

(5)(5)17.3836,140

Adhesive bonding machine operators and tenders

601.418.2037,850

Paper goods machine setters, operators, and tenders

2501.019.8441,270

Helpers--production workers

1,3201.413.4527,980

Production workers, all other

5400.916.6034,530

Footnotes:
(1) For a complete listing of all detailed occupations in the Dayton, OH Metropolitan Statistical Area, see www.bls.gov/oes/current/oes_19380.htm.
(2) Estimates for detailed occupations do not sum to the totals because the totals include occupations not shown separately. Estimates do not include self-employed workers.
(3) The location quotient is the ratio of the area concentration of occupational employment to the national average concentration. A location quotient greater than one indicates the occupation has a higher share of employment than average, and a location quotient less than one indicates the occupation is less prevalent in the area than average.
(4) Annual wages have been calculated by multiplying the hourly mean wage by a "year-round, full-time" hours figure of 2,080 hours; for those occupations where there is not an hourly mean wage published, the annual wage has been directly calculated from the reported survey data.
(5) Estimate not released.

 

Last Modified Date: Friday, July 19, 2019